1993 << Back To The X Files nº 2

__ \ / |_ / \ e n o n | o u n d a t i o n presents: \ / *------ the \ / / \ files -----* / \ Fall/1993 Issue: 2 INTRODUCTION TO BASIC DIGITAL TECHNOLOGY Written by: Erik Turbo File: 2 of 6 2. Time Division Multiplexing (TDM) 2.1 Defining Multiplexing Multiplexing basically combines or merges a number of signals into one composite signal. The most common type of multiplexer at NET is called a TIME DIVISION MULTIPLEXER. Time Division Multiplexing In the telephone industry, the D Channel Bank Time Division Multiplexer is the type most commonly used and the one you will probably use. The D Channel Bank Time Division Mutliplexer works by taking twenty four (24) voice channels and time division multiplexing them at the near end terminal. Then the signals are sent over a pair of wires to the far end terminal. This smae process is occuring at the far end terminal. The signal from the far end terminal is sent over another pair of wires to the near end terminal. Each terminal is equipped to restore the signal recieved to its orignal form. Time Division Multiplexing is used to take low speed information, sample it, and then send this information over a high speed data line. Each time all twenty four (24) channels have been sampled and sent, a framing signal is sent. This framing signal aids the far end terminal in identying and reassembling all of the information for each channel. This process is known as synchronizing data. On the next page you will learn how the sampled signals are quantized and encoded by a process called Pulse Code Modulation (PCM) before they are transmitted via Time Division Multiplexing to a distant terminal. 2.2 Multiplexing--Pulse Code Modulation (PCM) > At 8,000 samples per second, a single channel is sampled once per 125 micro-seconds. Each sample uses 5.2 microseconds of time. > There are approximately 120 microseconds of idle time between each sample on a single channel Pulse Code Modulation (PCM) facility. > To make efficient use of the facility, many samples are sent on the same path, which is called multiplexing. 2.3 Pulse Code Modulation (PCM) Frame A Frame requires 125 microseconds to transmit and contains once encoded sample (8-bit word) for each channel that is multiplexed, plus the framing bit. The Frame is sub-divided into Time Slots. A Time Slot represents the time required the send one 8-bit word. The basic Pulse Code Modulation (PCM) bit stream contains 1,544,000 bits/sec. 2.4 DS1 Bit Rate Computation 24 CHANNELS x 8 BITS/WORD 192 BIT + 1 FRAMING BIT 193 BITS/FRAME X 8000 TIMES/SEC 1544000 BITS/SEC OR 1.544 M BITS/SEC 2.5 Time Division Multiplex (TDM) > This diagram shows the overall digital transmission system. > The Analog signal is sampled 8000 times a second via a process called Pulse Amplitude Modulation (PAM). The Pulse Amplitude Modulation (PAM) sample represents the amplitude of the signal at the time of sampling. > Each Pulse Amplitude Modulation (PAM) sample is quanitzed and encoded to an 8-bit Digital signal via a process called Pulse Code Modulation (PCM). > The Pulse Code Modulation (PCM) samples from all 24 channels are combined via a process called Time Division Multiplexing and transmitted to a distant terminal over a common path. > At the distant terminal, the Pulse Code Modulation (PCM) samples are decoded, demultiplexed and filtered to reconstruct the orignal Analog waveform. 2.6 Conclusion Multiplexing is vital to our business because it allows us to take advanage of the idle time between each signle channel Pulse Code Modulation (PCM) facility. The idle time is used efficiently via multiplexing which allows us to send many samples on the same path. So multiplexing maximizes efficient use of the facility and reduces idle time by sending numerous samples over the same path. NOTICE Not for use or disclosure outside the NYNEX Corporation or any of its subsidiaries except when rightfully stolen. ------------------------------------------------------------------------------ EOF ---------------- Xenon Foundation Productions 1993 -------------------EOF ------------------------------------------------------------------------------